Detailed explanation of the technical parameters of hot stamping foil slitting machine
Posted by delishslitter
from the Business category at
08 Jan 2025 06:40:49 am.
Share this page: 
1. The basic technical parameters
1. Slitting materials
• Hot stamping foil PET material, the thickness is usually between 12u~20um.
2. Slitting width
• The effective slitting width is generally 25mm, and the common specification is 350~480mm, and some equipment may support wider or narrower materials.
3. Mechanical speed
• The speed of different models of machines may be different, some high-speed slitting machines can reach 450m/min or higher, but depending on the material process, it is usually between 200~450m/min.
2. Unwinding and winding parameters
1. Unwinding diameter
• Generally ¢800mm, some equipment may support different sizes of unwinding diameters, such as ¢3", ¢6", etc., and be equipped with mechanical chucks (e.g. shaftless unwinding).
2. Rewinding diameter
• For example, 2X¢600mm, some equipment may be equipped with ¢3" tile air shaft and other winding devices.
3. Transmission and structural parameters
1. Transmission mode
• Common transmission methods include timing belts, etc.
2. Guide roller material
• Generally, duralumin alloy aluminum rollers are used, such as HV700 type, etc.
3. Mechanical structure
• Generally made of strong materials such as steel plates to ensure the stability and durability of the equipment.
4. Accuracy and power parameters
1. Correction range
• Such as 150mm, error ± 0.5mm, etc., to ensure cutting accuracy.
2. The power of the whole machine
• The power of different models of hot stamping foil slitting machine may be different, generally around tens of kilowatts, such as about 30kw AC380V three-phase five-wire system.
5. Size and weight parameters
1. Dimensions
• Different models of hot stamping foil slitting machine may have different dimensions, generally within a few meters, such as 3500mm (length) X4500 (width) x 1900 (height).
2. Weight of the whole machine
• Usually around thousands of kilograms, such as about 5500KG.
6. Control system and functional characteristics
1. Master control system
• Adopt PLC and man-machine interface, with functions such as automatic shutdown of metering, automatic detection of residual quantity, automatic speed adjustment of line speed, etc.
2. Winding structure
• If the cantilever type with discharge tower device is adopted, it is convenient to discharge.
3. Discharge tower device
• Pneumatic push locking, hydraulic rotation, etc., easy to operate.
4. Edge Closing Machine
• Adopt independent winding rack, steel plate structure, direct wire coiling, etc.
5. Winding tension
• Adopt variable frequency motor, frequency converter and PLC joint control, with pre-tension system, automatic taper tension control.
6. Unwinding structure
• Such as shaftless unwinding device, hydraulic lifting, etc.
7. Main motor
• Frequency conversion motor, frequency converter drive.
8. Guiding system
• Adopt high-sensitivity ultrasonic electric eye heel correction system, etc.
9. Execution and locking
• Pneumatic mode, etc.
10. Traction
• S-type traction roller set, rubber pressure roller, pneumatic control, etc.
11. Low-voltage electrical appliances
• Adopt domestic famous and imported electrical components.
12. Slitting method
• Such as pendulum type straight knife slitting system, pneumatic control lifting, etc.
13. Vacuum cleaner
• Negative pressure vacuum collection device installed after slitting, etc.
To sum up, the technical parameters of the hot stamping foil slitting machine cover many aspects, and these parameters together determine the performance and use effect of the equipment. When choosing an hot stamping foil slitting machine, it is recommended to choose a suitable model and manufacturer according to the actual needs and production requirements.
1 Comments
Comments
delish automation