Introduce the use of automatic ribbon slitting machine
Posted by delishslitter
from the Business category at
28 Nov 2024 07:41:47 am.
Share this page: 
1. Start-up preparation
1. Connect the power supply: Connect the automatic ribbon slitting machine to a stable power supply to ensure that the voltage and current meet the equipment requirements.
2. Start the device: Press the on/off button of the device and wait for the green indicator light to turn on, indicating that the device has started normally.
2. Parameter setting
1. Adjust the processing table: Adjust the height and pressure device of the processing table according to the width and length of the carbon to be cut, so as to ensure that the ribbon can be attached to the cutting knife.
2. Set cutting parameters: Through the control panel or touch screen of the device, set the cutting speed, cutting length, cutting width and other parameters. The settings of these parameters should be adjusted according to the material, thickness and cutting requirements of the ribbon.
3. Feeding and cutting
1. Loading: Place the ribbon to be cut on the loading rack of the machine to ensure that the ribbon is flat and will not slip off.
2. Start cutting: Press the cutting button, and the machine will automatically start cutting the ribbon. During the cutting process, the cutting effect can be monitored in real time and fine-tuned as needed.
3. Collect the cut ribbon: After the cutting is completed, the machine will automatically collect the cut ribbon to the specified location. At this point, the cut ribbon can be removed and the next step of processing or packaging can be carried out.
4. Maintenance and maintenance
1. Clean up the debris: During the cutting process, some ribbon debris will be generated. In order to keep the equipment clean and cut effectively, the debris inside the equipment should be cleaned regularly.
2. Check the blade: The blade is a key component for cutting ribbons, and the wear and tear of the blade should be checked regularly. If the blade is severely worn, it should be replaced with a new one in time.
3. Lubricate the parts: Some parts of the equipment need to be lubricated regularly to ensure its smooth operation. According to the instruction manual of the equipment, the appropriate lubricant should be selected for lubrication.
5. Precautions
1. Safe operation: When operating the automatic ribbon slitting machine, the safety operation procedures of the equipment should be followed to avoid accidents.
2. Regular maintenance: In order to maintain the good performance and prolong the service life of the equipment, the equipment should be maintained and maintained regularly.
3. Professional training: Operators should receive professional training and be familiar with the operation methods and precautions of the equipment to ensure the correct use and safe operation of the equipment.
To sum up, the use of automatic ribbon slitting machine includes start-up preparation, parameter setting, feeding and cutting, maintenance and maintenance, and precautions. When using the automatic ribbon slitting machine, it should be operated in strict accordance with the instruction manual of the equipment to ensure the normal operation of the equipment and the cutting effect.
0 Comments