What are the technical parameters of hot stamping foil slitting machine
Posted by delishmachine
from the Business category at
08 Nov 2024 02:14:21 am.
Share this page: 
1. Slitting Material:
• Hot stamping foil PET material (such as 12u~20um thickness), etc.
2. Slitting effective width:
• Generally 25mm, commonly used specifications are 350~480mm, some devices may support wider or narrower materials.
3. Mechanical Speed:
• The speed of different models of machines may vary, some high-speed slitting machines can reach mechanical speeds of 450m/min or higher.
4. Slitting speed:
• Depending on the material process, it is usually between 200~450m/min.
5. Unwinding Diameter:
• Generally ¢800mm, some equipment may support different sizes of unwinding diameters, such as ¢3", ¢6", etc., and be equipped with mechanical chucks (e.g. shaftless unwinding).
6. Winding diameter:
• For example, 2X¢600mm, some equipment may be equipped with ¢3" tile air shaft and other winding devices.
7. Transmission:
• Common transmission methods include timing belts, etc.
8. Guide Rollers:
• Generally, duralumin alloy aluminum rollers are used, such as HV700 type, etc.
9. Mechanical Structure:
• Generally made of strong materials such as steel plates to ensure the stability and durability of the equipment.
10. Guiding Range:
• Such as 150mm, error ± 0.5mm, etc., to ensure cutting accuracy.
11. Power:
• The power of different models of hot stamping foil slitting machine may be different, generally around tens of kilowatts, such as about 30kw AC380V three-phase five-wire system.
12. Weight:
• Usually around thousands of kilograms, such as about 5500KG.
13. Dimensions:
• Different models of hot stamping foil slitting machine may have different dimensions, generally within a few meters, such as 3500mm (length) X4500 (width) x 1900 (height).
In addition, the hot stamping foil slitting machine may also have the following technical parameters and functional characteristics:
• Main control system: using PLC and man-machine interface, with functions such as automatic shutdown of metering, automatic detection of residual quantity, automatic speed adjustment of line speed, etc.
• Rewinding structure: if the cantilever type with discharge tower device is adopted, it is convenient to unload.
• Discharge tower device: pneumatic push locking, hydraulic rotation, etc., easy to operate.
• Edge winding machine: independent winding frame, steel plate structure, direct wire coiling, etc.
• Winding tension: Frequency conversion motor, frequency converter and PLC joint control, with pre-tension system, automatic taper tension control.
• Unwinding structure: such as shaftless unwinding device, hydraulic lifting, etc.
• Main motor: Frequency conversion motor, frequency converter drive.
• Deviation correction system: the use of high-sensitivity ultrasonic electric eye and edge correction system, etc.
• Actuation and locking: pneumatic mode, etc.
• Traction: S-type traction roller set, rubber pressure roller, pneumatic control, etc.
• Low-voltage electrical appliances: domestic famous and imported electrical components.
• Slitting method: such as pendulum type straight knife slitting system, pneumatic control lifting, etc.
• Dust collection device: install negative pressure dust collection device after slitting, etc.
Please note that the above technical parameters and functional features are for reference only and may vary depending on the model and manufacturer. When choosing an hot stamping foil slitting machine, it is recommended to choose a suitable model and manufacturer according to the actual needs and production requirements.
0 Comments