Analysis of the reasons for the uneven winding of the sliding shaft of the slitting machine
Posted by delishgroup
from the Business category at
14 Aug 2024 08:04:01 am.
Share this page: 
The unbalanced winding roller of the slitter may cause the slip shaft to be unwinded. This may be due to wear on the surface of the winding roll or deformation due to impact. In this case, the winding rollers need to be trimmed or replaced.
2. the slitting machine slip axis is deflected
Deflection of the slip axis of the slitter can also lead to uneven winding. This may be due to an imbalance in the slip shaft itself or a deviation in the installation. The solution is to adjust the installation position of the differential shaft or replace it with a new differential shaft.
3. The feed speed of the slitting machine is unstable
Unstable feed rates can also lead to uneven winding of the slip shaft. This can be due to old, damaged or improperly used equipment, causing fluctuations in feed rates. The solution is to perform maintenance and care for the equipment, or replace it with a new one.
4. the loading and unbalanced feeding
The unbalanced loading and unloading is also one of the reasons for the uneven winding of the slip shaft. If the loading and unloading are unbalanced, it will lead to uneven force on the surface of the reel, which will affect the effect of winding. The solution is to adjust the loading and unloading method, or add support equipment to balance the reel surface.
4. the tension of the reel is uneven
The uneven tension of the reel is also a reason for the uneven winding of the slip shaft. If the reel tension is uneven, it will cause the reel surface to be unwinded. The solution is to adjust the winding tension of the equipment or change the material.
6. Summary
The above is the analysis and solution of the cause of uneven winding of the slitting shaft of the slitting machine. It is important to note that although the above causes are relatively common, there are other factors that can cause the same problem. Therefore, in actual operation, users need to analyze and deal with specific situations to ensure the normal operation of the equipment.
Tags: slitting machine
0 Comments