ADP-200HR adapter 100-240V??2.5A 50-60Hz (for w 19.5V 10.26A, 200W
Posted by kakakakarin
from the Business category at
19 Sep 2019 07:18:41 am.
Share this page: 
- Brand : SONY
- Alternate with the following models : ADP-200HR
- Cell technology : GSB334
- Capacity : 100-240V??2.5A 50-60Hz (for w
- Voltage : 19.5V 10.26A, 200W
- Product dimensions : 6.5*4.4mm Barrel tip (ref to the picture)
- Encoding : SON17450
- IT:SONY ADP-200HRBatteria
- JP:SONY ADP-200HRアダプター
- IT:SONY ADP-200HRBatteria
- AT:Akkus SONY ADP-200HR Ersatzbatterien zu verkaufen
The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.
You may also want to see this battery
Tags: SONY, ADP-200HR, SONY ADP-200HR, SONY laptop battery, SONY adapter, SONY ADP-200HR laptop battery, SONY ADP-200HR adapter
0 Comments